CHEVY - SILVERADO - 4TH GEN - GMC - SIERRA - 2019-PRESENT - 5TH GEN - EXPLORE SERIES - CREW CAB - SEAT DELETE PLATE SYSTEM - SECOND ROW - 100%

The Chevrolet Silverado, Silverado HD and GMC Sierra 1500 and Sierra HD second row seat deletes for the Crew Cab 4 door are designed for you to easily remove your rear seats and create a flat and secure platform for securing your gear. The platform includes hatches that allow access to the factory storage space below the rear seats. In addition to the base plate, you also get a back wall replacement that is secured to the base plate and the factory anchor points in the back wall.

This product is designed as a 100% Seat Delete kit only due to the seat back being a single piece unit.

This unit is completely bolt in and does not require drilling. 

Please take a look at the photo of the factory back wall without the seats installed to ensure that your vehicle matches what we have already designed around. If your back wall and under seat areas do not look like what you see in the following photo, please reach out to us prior to ordering as we cannot guarantee fitment into your vehicle.  The image below shows six silver-colored threaded adapters, that are part of the installation hardware, already in place in the factory bolt holes.

Photo of the vehicle which our product was designed to fit into.

If you have studs coming from the floor, this seat delete is not compatible.

There are also drawer options for this product, drawers for both drivers and passengers side measure 19-3/16"w x 28"d and in three heights 8", 10" or 12".

The addition of the back wall gives you ample space to secure other gear, such as fire extinguishers, first aid kits and other personal gear.

• National Luna Weekender 50 and 52, Legacy 40 and 52
• Dometic CFX3 35, 45 and 55
• ARB Classic 35, 47 and Zero 38 and 47
• SnoMaster TR42 and CL40
• Other fridge models can certainly fit in this space. our recommended maximum dimensions for this area are 28"w x 18"d x 22"h front to back or sideways orientation.

Product Weight:

• Driver Side - 45 lbs.
• Passenger Side with Center Support Leg Installed - 51 lbs. 
• Passenger Side without Center Support Leg - 46 lbs.
• Note: Factory Seat is 119.5 lbs.

Product Dimensions (Usable Area):

• Floor - 60" x 35"
• Back Wall - 57" x 21"

FAQS

• This product has only been test fitted into 2019 model year vehicles. Please confirm that your vehicle interior looks the same as the one in the photos prior to purchasing. This will require the customer to remove the rear seat backs to verify.
• Drawer Module Options - Explore Series - Single Drawer Module - 19-3/16"W x 28"D - With Non-Fitted Top Plate
  
  • Same drawer for Drivers and Passengers Sides
    • 19-3/16" W x 28" D
    • Offered in these available heights: 8", 10" or 12"
      
    • Available Colors: Black or Gray
  • Drawer has a rectangular top plate and is not fitted to the back wall as the space is only 3-5/16" wide
• Dometic Fridge Drawer Option will work but will only fit inside of a maximum module depth of 32" and it will carry over 4" onto the opposite seat delete. Hatch doors will still work on the seat delete behind the fridge drawer.
• Solo Fridge Slide Standard will fit.