Check out the TERRAPOD RTTx XL Roof Top Tent!
0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart

      Racer Edition Spot Light Pattern Projects A Narrow 4° Beam Far Down Roadbaja designs racer edition light pattern diagram

      Models 30" and above in length are also available in an arched array, in addition to the standard straight configuration.


      OnX6 Racer Edition LED Light Bar (10"-50")
      Mounting Brackets
      ** Wiring Harness is NOT included **

      Baja Designs OnX6 Racer Edition LED Light Bar Features

      Baja Designs OnX6 Racer Edition Key Features

      • Optimized for extreme speeds on off road racing trails
      • Optional 20% Dimming Capability - a thermal management microprocessor enables a dimming capability if a secondary on/off switch is wired in.

      Baja Designs Features:
      Satisfactions Guarantee – 30 Day Money Back Guarantee
      Limited Lifetime Warranty – Complete Purchase Protection
      uService® – Replaceable Lenses And Optics
      ClearView® – All The Light, Right Where You Need It.
      MoistureBlock™ – Waterproof, Rain Proof, Submersible
      CopperDrive® – Only LED Driven At 100%
      5000K Daylight – Less Driver Fatigue, Natural Color

      Baja Designs OnX6 Racer Edition Light Bar Dimensions & Specifications

      NOTE: For additional technical details on this product including a wiring diagram, uService instructions to swap out lenses/patterns, a mounting hardware diagram and detailed warranty information, please see the Baja Designs OnX6 Racer Edition Data Sheet.

      Wattage/Amps: Varies by model, see chart in product photos
      Lumens: Varies by model, see chart in product photos
      Dimensions: (10"- 50") x 4.29" x 2.69"
      Weight: 4.25 lbs per 10" section
      LED Life Expectancy: 49,930 Hours
      Front Lens: Hard Coated Polycarbonate
      Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
      Bezel: Billet Machined Aluminum
      Hardware & Bracket Material: Stainless Steel 

      Standards of Compliance:

      Exceeds MIL-STD810G (Mil-Spec Testing- Low Temperature Test, High Temperature, Temperature & Humidity, Thermal Shock Cycling, Dust, Random Vibration, Mechanical Shock, Low Pressure & Drip Box Water)
      Built-In Overvoltage Protection
      IP69K (Submersible up to 9ft & Pressure Washable)
      IK10 Compliant (Mechanical Impact Testing)
      Salt Spray Certified 
      High/Medium Modes

      OnX6 Racer Edition LED Light Bar Wiring Requirements & Installation

      PLEASE NOTE: all Baja Designs lighting products need to be wired in to 12V power. Installation of a wiring harness and/or accessories not included with purchase of the light will likely be required.

      To discuss wiring options and get set up with a package that includes an appropriate wiring harness; or to request installation assistance, please don't hesitate to get in touch. We also offer & install sPOD switch controllers if you want a clean solution to integrate all your 12V accessories.

      Baja Designs OnX6 Racer Edition Light Patterns

      With Baja Designs uService design, you are able to swap out the front lens of your LED for a new lens. This means you can easily change the color and light pattern of your OnX6 Racer Edition Light Bar if you later change your mind about what lighting zone you prefer, or if you scratch up the original lens. Replacement lens kits come with a new lens for the light pattern of your choosing, and a fresh O-ring. 

      Baja Designs Vehicle Light Patterns Chart
      • Racer Edition Spot: A longer and narrower 4° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 5)

      • Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Cornering (44°) and spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)