PLEASE NOTE: 10" Hybrid bars can be operated with two switches- one to control the LED chips and another switch to control the two Laser chips. The OnX6 Laser bars sized 20" and above only function with one on/off switch (unlike the 10" size that features separate switches for the LED chips and Laser chips.)
PLEASE NOTE: 40" and 50" Hybrid Laser light bars are extremely high output and as such must be built as dual power cord/ dual control. You will need two harnesses to power a 40" or 50" bar. Please verify that your vehicle has the electrical output to run these products before purchase.
Hybrid LED/Laser Light Bar
** Wiring Harness is NOT included **
Baja Designs OnX6 Hybrid Laser Light Features
Baja Designs OnX6 Hybrid Laser Key Features
- Unprecedented output resulting from incorporation of powerful laser chips
Baja Designs Features:
Satisfactions Guarantee – 30 Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService® – Replaceable Lenses And Optics
ClearView® – All The Light, Right Where You Need It.
MoistureBlock™ – Waterproof, Rain Proof, Submersible
CopperDrive® – Only LED Driven At 100%
5000K Daylight – Less Driver Fatigue, Natural Color
Baja Designs OnX6 Hybrid Laser Light Dimensions & Specifications
NOTE: For additional technical details on this product including a wiring diagram, uService instructions to swap out lenses/patterns, a mounting hardware diagram and detailed warranty information, please see the Baja Designs Hybrid Laser Data Sheet.
Wattage/Amps: Varies by model, see chart in product photos
Lumens: Varies by model, see chart in product photos
Dimensions: (10"- 50") x 4.29" x 2.69"
Weight: 4.25 lbs per 10" section
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Standards of Compliance:
Exceeds MIL-STD810G (Mil-Spec Testing- Low Temperature Test, High Temperature, Temperature & Humidity, Thermal Shock Cycling, Dust, Random Vibration, Mechanical Shock, Low Pressure & Drip Box Water)
Built-In Overvoltage Protection
IP69K (Submersible up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)
Salt Spray Certified
OnX6 Hybrid Laser Wiring Requirements & Installation
PLEASE NOTE: all Baja Designs lighting products need to be wired in to 12V power. Installation of a wiring harness and/or accessories not included with purchase of the light will likely be required.
The 40" and 50" Hybrid Laser light bars are extremely high output and as such must be built as dual power cord/ dual control. You will need two harnesses to power a 40" or 50" bar. Please verify that your vehicle has the electrical output to run these products before purchasing.
To discuss wiring options and get set up with a package that includes an appropriate wiring harness; or to request installation assistance, please don't hesitate to get in touch. We also offer & install sPOD switch controllers if you want a clean solution to integrate all your 12V accessories.
Baja Designs OnX6 Hybrid Laser Light Patterns
With Baja Designs uService design, you are able to swap out the front lens of your LED for a new lens. This means you can easily change the color and light pattern of your OnX6 Hybrid Laser Light Bar if you later change your mind about what lighting zone you prefer, or if you scratch up the original lens. Replacement lens kits come with a new lens for the light pattern of your choosing, and a fresh O-ring.
- High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)