Check out the TERRAPOD RTTx XL Roof Top Tent!
0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
      Total

      Baja Designs LED Dome Light w/Switch Features

      Dome Light w/Switch Key Features

      • 400 Lumens
      • Includes tube mounts (curved backing)
      • Convenient on/off switch
      • Waterproof

      Satisfactions Guarantee – 30 Day Money Back Guarantee
      Limited Lifetime Warranty
      – Complete Purchase Protection

      Baja Designs LED Dome Light w/Switch Specifications & Dimensions

      Lumens: 400
      Wattage/Amps:
       4W / 0.4 A
      Dimensions: 2.7" H x 1.2" W x .45" D
      Weight: 1.8 oz
      Ambient Temperature: -40F to 145.4F
      Input Voltage: 12 - 14 V DC
      LED Life Expectancy: 49,930 Hours
      Front Lens: Hard Coated Polycarbonate
      Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
      Hardware & Bracket Material: Stainless Steel

      Standards of Compliance:

      Exceeds MIL-STD810G (Mil-Spec Testing)
      * Analog Board Design does not Produce High Frequency Noise
      Built-In Overvoltage Protection
      IP69K (Waterproof up to 9ft & Pressure Washable)
      IK10 Compliant (Mechanical Impact Testing)

      Caution: Dome Lights can get very hot when used for long periods of time. Please use caution when handling or installing. 

      LED Dome Light Wiring Requirements & Installation

      PLEASE NOTE: all Baja Designs lighting products need to be wired in to 12V power. Installation of a wiring harness and/or accessories not included with purchase of the light will likely be required.

      To discuss wiring options and get set up with a package that includes an appropriate wiring harness; or to request installation assistance, please don't hesitate to get in touch. We also offer & install sPOD switch controllers if you want a clean solution to integrate all your 12V accessories.

      Baja Designs Dome Light w/Switch Installation Options

      1. Utilizing the included tube mount, install the shorter M4 hardware through the rock light and overmold secure the back with the provide M4 nuts. Once the rock light has been installed you can slide the provided zip tie through the zip tie channel followed by securing the dome light and tube mount to the desired location.
      2. Drill and tap two M4 x 0.7 holes while utilizing the longer M4 bolts mount the dome light unit to your vehicle. The dome light requires 12V power. The red wire is positive and the black wire is ground. The unit can become hot so be careful it is not mounted near anything that may melt or be damaged by the heat.

      Baja Designs LED Dome Light Video

      Video Credit: Baja Designs