FRONT RUNNER Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit


It’s never been easier to start your adventure with the Toyota4Runner (2010-Current) Slimsport Roof Rack Kit. This low-profile rack lets you immediately enjoy the Great Outdoors with versatile accessories so you can build your own adventure and go! This Slimsport Roof Rack is ready to play.


KSTF001 - Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit - by Front Runner

Consists of:

1 x Toyota 4Runner (2010-Current) Slimsport Roof Rack KitInstallation HardwareFitting Instructions

Materials used:

Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37kg (81.57lbs)Assembled Rack Kit Dimensions:2225mm (87.6'') L x 1181mm (46.5'') W x 121mm (4.7'') HThe t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4''-2.8'') to the highest point of your roof.Shipping Dimensions:Width: 325mm (13'')Length: 1700mm (67'')Height: 160mm (6'')Shipping Weight:Weight: 37kg (81lbs)

FRONT RUNNER Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit Features

  • This low profile flat deck Slimsport rack has a load carrying area of 2080mmL (81.88'' ) x 1175mmW (46.25'').
  • The sleek side rails have integrated mounting feet.
  • Mounting feet also have additional brace brackets for added strength.
  • The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
  • Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket - by Front Runner.
  • Easily add on the Slimsport Side Mount Accessory Bracket / Small - by Front Runner (sold separately) for all Front Runner side mount accessories.
  • The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
  • Need a lightbar? The optional Toyota 4Runner (2009-Current) Slimsport Rack 40in Light Bar Wind Fairing - by Front Runner (sold separately) has a 40'' cutout to allow use of 40in LED Slim Light Bar VX1000-CB / 12V/24V / Single Mount - by Front Runner (sold separately).
  • Fitment guide and all mounting hardware included.
  • 6in/T30 Torx Allen Key for Slimsport Rack - by Front Runner is required for installation (sold separately).
  • The middle and rear mounting feet utilize the factory fixing points.
  • Front mounting feet do not require drilling when installed with the included No Drill kit, but hardware is included for the drill bolt option (recommended).
  • Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket - by Front Runner and Recovery Device AND Gear Holding Side Brackets - by Front Runner are not compatible with the Slimsport rack kit range.