FRONT RUNNER Ford F150 Super Crew (2018-2020) Slimsport Roof Rack Kit

$855.00
$855.00
SKU: FR-KSFF001

It’s never been easier to start your adventure with the Ford F150 (2018-2020) Slimsport Roof Rack Kit. This low-profile rack lets you immediately enjoy the Great Outdoors with versatile accessories so you can build your own adventure and go! This Slimsport Roof Rack is ready to play.

Specifications

KSFF001 - Ford F150 Super Crew (2018-2020) Slimsport Roof Rack Kit - by Front Runner

Consists of:

1 x Ford F150 Super Crew (2018-2020) Slimsport Roof Rack KitInstallation Hardware Fitting Instructions

Materials used:

Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions: 1676mm (66“) L x 1411mm (55.6“) W x 113mm (4.4“) HApproximate Installed Weight: 32.67kg (72.02lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4''-2.8'') to the highest point of your roof.Shipping Dimensions:Width: 325mm (13'')Length: 1700mm (67'')Height: 160mm (6'')Shipping Weight:Weight: 32.67kg (72lbs)

FRONT RUNNER Ford F150 Super Crew (2018-2020) Slimsport Roof Rack Kit Features

  • This low profile flat deck Slimsport rack has a load carrying area of 1475mmL (58'' ) x 1405mmW (55,3'').
  • The sleek side rails have integrated mounting feet.
  • Mounting feet also have additional brace brackets for added strength.
  • The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
  • Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket - by Front Runner.
  • Easily add on the Slimsport Side Mount Accessory Bracket / Small - by Front Runner (sold separately) for all Front Runner side mount accessories.
  • The included standard full fairing with rubber edge trim makes the rack ultra-quiet and allows full operation of the moonroof Need a lightbar? The optional Ford F150 Super Crew (2018-2020) Slimsport Rack 40in Light Bar Wind Fairing - by Front Runner (sold separately) has a 40'' cutout to allow the use of 40in LED Slim Light Bar VX1000-CB / 12V/24V / Single Mount - by Front Runner (sold separately).
  • Fitment guide and all mounting hardware included.
  • 6in/T30 Torx Allen Key for Slimsport Rack - by Front Runner is required for installation (sold separately).
  • Drilling required for fitment (all hardware included).
  • Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket - by Front Runner and Recovery Device AND Gear Holding Side Brackets - by Front Runner are not compatible with the Slimsport rack kit range.
  • Note: For models with a front antenna, the fin or puck antenna outside edge must be 10'' from the inside edge of the roof ditch.
  • Please contact our help center if you are unsure.